首页-产品展示-详细内容
 
PCN400型全自动运动粘度测定仪
设备采用了模块化设计,检测部分采用了先进的传感器和高精度AD转换电路,主控部分采用了多个工业应用、高可靠性16位RISC结构、超低功耗微处理器,良好可靠的通讯将各模块组成一个统一的、可靠的测控平台。
设备运行程序,采用高质量、最简捷的模块化程序设计,并与硬件有机的结合,使得运动黏度测定过程的全自动升温和恒温、液位检测、计时、清洗黏度管、打印等全部工作全自动完成,达到了一键出结果的操作方式。
设备预设了4组测定参数,供检测不同试样时选用,便于检测操作。同时预设参数具有可修改性,来满足测定特殊试样的要求。
设备具有出厂设置值恢复功能,当设置调整不当时,可选择"恢复出厂设置"选项恢复正常的工作状态。同时仪器内部的自检功能确保了工作长期连续的可靠性。
特点
•良好人机界面,方便操作
•一键完成运动黏度测定,简化操作
•四组预置参数,供选用
•可修改预置参数,适应特殊要求
•红外液位检测不受室内光线、灯光干扰
•液位检测位置可调整,灵活自如
•全部模块化设计稳定、可靠性高
•全自动储存100个检测结果,并随时查看或打印
•检测过程遵守标准规定,数据可靠
•检测方法可靠,重复性好
•可长期连续工作,故障率极低
执行标准:    GB/T265
技术参数
温度范围:    室温~+100°C 精度±0.01°C。
温度传感器:  德国进口的Pt 100不锈钢探头, 内置温度校正,检测结果可靠。
加热方式:    电加热单元,最大加热功率1500 W,可编程控制加热速率。
液位检测:    红外光电检测。
显  示:      7寸彩色触摸屏。
温度校正:    全自动校正,可编程校正。
数据存储:    100测试结果。
电  源:       AC220V 50Hz。最大功率1500 W
使用环境温度:10~40℃
存储环境温度:0~50℃
PCN400 Automatic Viscosity Tester
The equipment adopts a modular design. The detection part adopts advanced sensors and high-precision AD conversion circuits. The main control part adopts a number of industrial applications, high-reliability 16-bit RISC architecture, ultra-low-power microprocessors, and is reliable and reliable. Communications will form a unified and reliable monitoring and control platform for each module.
The equipment operation program adopts high quality and simplest modular program design, and is organically combined with hardware. It makes full automatic temperature rise and constant temperature, liquid level detection, timing, cleaning viscosity tube, printing, etc. of the kinematic viscosity measurement process. Automatically completed, to achieve a one-button operation method.
The device presets four sets of measurement parameters for use when testing different samples for ease of detection. At the same time, the preset parameters are modifiable to meet the requirements for the determination of special samples.
The device has a factory set value recovery function. When the settings are adjusted incorrectly, the "restore factory settings" option can be selected to restore normal working conditions. At the same time, the internal self-test function of the instrument ensures the long-term continuous reliability of the work.
Features
• Good man-machine interface, easy to operate
• One-touch kinematic viscosity measurement simplifies operation
• Four preset parameters for selection
• Can modify preset parameters to meet special requirements
• IR level detection is not affected by indoor light and light interference
• The liquid level detection position can be adjusted, flexible and flexible
• All modular design is stable and reliable
• Fully automatic storage of 100 test results and viewing or printing at any time
• The inspection process complies with the standards and the data is reliable
• reliable detection method, good repeatability
• It can work continuously for a long time and the failure rate is extremely low
Executive Standard: GB/T265
Technical Parameters
Temperature range: room temperature ~ +100 °C Accuracy ± 0.01 °C.
Temperature sensor: Pt 100 stainless steel probe imported from Germany, built-in temperature correction, reliable test results.
Heating method: electric heating unit, maximum heating power 1500 W, programmable heating rate.
Level detection: infrared photoelectric detection.
Display: 7-inch color touch screen.
Temperature correction: automatic correction, programmable correction.
Data storage: 100 test results.
Power source: AC220V 50Hz. Maximum power 1500 W
Ambient temperature: 10~40°C
Storage environment temperature: 0 ~ 50 °C
 
   
本站关键词:闪点仪开口闪点仪闭口闪点仪全自动运动粘度测定仪
友情链接  

 
版权所有 吉林市普锐特科技有限责任公司 吉ICP备07002978-1号 
地址:吉林高新区烽火街烽火菜市场20号网点
手机:13944694406 
电话:0432-66180758   传真:0432-64630911    售后电话:0432-68080211 17644246711
网址:www.jlprtkj.com 邮箱:prtlz@163.com